48
Keysight M8040A High-Performance BERT Getting Started Guide
2
Basic Setup for M8040A
10 Change the
Vendor Daemon Location
(which is blank) to the location
of the
Agilent.exe
file:
a
For 32- bit Windows, enter “
C:\Program Files\Agilent\ACCL\
Licensing\bin\Agilent.exe
”.
b
For 64- bit Windows, enter “
C:\PROGRA~2\Agilent\ACCL\
Licensing\bin\Agilent.exe
”.
11 Click
Save
.
12 Start the daemon by pressing
Start
.
13 To verify the status of the
server
, select the
Dashboard
tab and click
the
Concurrent
button. Wait for the Web page to refresh. If the
“Keysight” daemon is not selected in the vendor drop- down list in the
upper right side of the
Licenses
page, then select it. Click
Select
.
You will now see the list of floating
licenses
that are managed by
lmadmin.exe
.
Installing and Setting up Client PC Floating Licenses
The following procedures show how to install and set up client PC floating
licenses. Repeat this procedure for each client PC.
1 Ensure that you have the Keysight Licensing Services and the M8000
software to be installed on the client PC.
2 Create the Client floating license files.
The Client floating license files redirect licensing requests to the
license server. Only one client floating license file needs to be created.
This client floating license file is copied and re- used by each client PC.
a
Make a copy of the original license server floating license file.
Remove all line entries except these three lines, which you must
modified as shown.
•
“SERVER” line: Keep original text
•
“VENDOR” line: If the optional VENDOR line “port” number is
included in the original server license file, remove the optional
“Vendor” daemon TCP/IP port number from the line
•
“USE_SERVER” line: Keep original text
NOTE
For 64-bit Windows, the file is in “C:\Program Files (x86)”, but the Web
page does not allow you to enter a file path containing an open or close
parenthesis, so you must instead enter the short file name
“C:\PROGRA~2” of the path.
