22
Keysight M8040A High-Performance BERT Getting Started Guide
1
Introduction
As displayed in
on page -21, the M8045A module has the
following components.
Table 3
Insertion/Extraction and Retaining
Table 4
Front Panel LEDs
Component
Description
Retaining screws
The screws on both ends of the module are used to retain the module tightly
inside the M9505A AXIe Chassis slot once you have fully placed it inside the
chassis. To remove the module, you first need to loosen these screws ensuring
that these screws disengage completely.
Module Insertion/Extraction
Handles
The handles on both sides of the module to insert or eject the module from the
slot of the M9505A AXIe Chassis.
Connector Name
Active when...
Color
Fail
power-up fault condition
red
Access
power-up ready state
green
Data Mod In 1/2
output is active
green
Clk Out 1/2
output is active
green
Ctrl Out 1/2
output is active
green
Ctrl In 1/2
logic level is detected
green
P & N 1/2
output is active
green
Clk In
signal is detected
green
Ref Clk In
signal is detected
green
Ref Clk Out
not used
green
Aux In
not used
n/a
Clk Out
output is active
green
Trig Out
output is active
green
