manualshive.com logo in svg

Keysight Technologies J-BERT M8040A, Руководство по началу работы

Поделиться
Скачать
Keysight Technologies J-BERT M8040A Скачать руководство пользователя страница 25

Keysight M8040A High-Performance BERT Getting Started Guide

25

Introduction

1

 

M8046A High-Performance BERT Analyzer Module

The M8046A is an instrument module that can be installed into the 

M9505A 5- slot AXIe chassis. This module occupies two slots and requires 

the M8045A module for proper operation.

The M8046A supports symbol rates up to 32 GBaud, the default is NRZ 

format. 

The analyzer module can be used for error analysis in conjunction with the 

M8045A pattern generator, the M8195A/M8196A Arbitrary Waveform 

generators or as stand-alone.

M8046A Features

• Symbol rates 2 to 32.4 GBaud
• One channel per 1-slot module
• 70mV input sensitivity 
• Supports NRZ and PAM-4
• Real-time bit error and symbol error analysis
• Pattern independent PAM-4 clock recovery 

M8046A Module Components

The following figure displays the front panel of the M8046A module with its 

various components:

Figure 6

M8046A module front panel

NOTE

The three or four channel configuration requires a cable (provided with 

the M8046A) that connects the M8045A SYNC OUT to the M8046A SYNC 

IN to synchronize the two modules to a common system clock. 

Содержание J-BERT M8040A









































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды