Keysight Technologies J-BERT M8040A Скачать руководство пользователя страница 40

Страница: 40 / 72

Keysight M8040A High-Performance BERT Getting Started Guide

Basic Setup for M8040A

To install the software
1 Insert the CD ROM into the host computer or download the latest

M8070A software from

www.keysight.com/find/M8040A.

2 Double-click the setup (.exe) file.

The InstallShield Wizard is displayed.

3 If displayed, click

Install

to continue or click

Next

if the system

controller meets the minimum system configuration requirements

displayed by the wizard.

4 When displayed, accept the license agreement and click

Next

5 Click

Install

to start the installation then follow any on-screen

prompts/instructions.

6 In Windows click

Start

All Programs

Keysight M8070A

Keysight

M8070A

to verify software installation. The Startup screen of the

M8070A software should display.

Step 9 - Install the Licenses

The M8070A software requires a license to communicate with the M8040A

hardware. You either purchased an M8070A license to install on a

dedicated host computer (M8070A- 0TP) or one that can be installed on a

network server that will be used as a license server for operation over a

company network (M8070A-0NP, floating/networked).

In addition to the M8070A license, the M8040A, being a modular product,

includes different sets of modules hosted in an M9505A AXI chassis. Each

module has its own licenses corresponding to specific features. Module

licenses are pre-installed at the factory according to the specific options

that were ordered.

For more detailed information about licensing, refer to the

M8070A User

Guide

NOTE

All M8040A-BU1 licenses have been pre-installed (except for a

floating/networked license). All other system configurations require

license installation as described in this step.

Содержание J-BERT M8040A









































































Результаты поиска

Содержание J-BERT M8040A

Отзывы:

Бренды по названию

Популярные бренды

Keysight Technologies J-BERT M8040A, Руководство по началу работы

Результаты поиска

Содержание J-BERT M8040A

Отзывы:

Бренды по названию

Популярные бренды