Related Documentation
Agilent M9202A Introduction
The scope of this Startup Guide is to detail the processes of receiving and installing the Agilent M9202A PXI
Express 12-bit Wideband IF Digitizer, installing the required software, and verifying basic module operation. If
you have any questions after reviewing this information, please contact your local Agilent representative or
contact us through our website at
www.agilent.com/find/assist
Related Documentation
This Startup Guide and the documentation listed below are on the CD
and at
. Select
Technical Support >
Manuals
.
l
Help system for the Soft Front Panel
l
Help systems for the device drivers (IVI-C and IVI-COM, and
LabVIEW G)
l
Specifications (Data Sheet)
Follow the Startup Sequence
This Start-Up Guide is intended to lead the user through the four steps of product installation as summarized in the
diagram below. An optional fifth step shows how to perform a operational verification of the M9202A.
Step 1
: Unpack and Inspect
Step 2
: Verify Shipment
Step 3
: Install Drivers and Software
Step 4
: Install Modules
Closely follow the startup process flow in this document. Deviating from the sequence can cause
unpredictable system behavior, damage your system, and may cause personal injury.
Agilent M9202A PXI Express 12-bit Wideband IF Digitizer Startup Guide
7
