Keynetix Keylogbook, Руководство пользователя, Страница: 28 / 45

Keylogbook
– Getting Started Guide
12/09/2013 28
Equipment details (Rotary option only)
Use this button to record your Drilling/coring equipment details, including the hole size, barrel if used (coring only)
the type of drilling bit used bit ID if needed, type of flush used etc.
Casing Details
Use this button to record all the depths over which casing was used, you will need to record both diameters and
depths of the casing used.
Chiselling (CP Only)
Use this button to record any chiselling carried out during this shift- hole this is done by recording the depths from
and to along with the start time of the chiselling and duration.
Water Added
Use this button to record any water that is added to the exploratory hole this is done by recording the start and
finish depths over which water is added.
Standpipe, perm test
Use this button to record either the Standpipe or Perm test details, this is achieved by following the on screen
instructions. You can also use this option to view previous perms tests. Selecting this option after completing the
install or perm test allows you to edit the details
Backfill
Please note that the backfill details are input as they are placed in the hole i.e. deepest first.