Lower to Upper +1: Press
three keys
simultaneously on upper manual while switching
SPLIT on to map lower to upper manual up to highest of all keys pressed. Lower notes
range is transposed one octave up (useful for left-hand
8’ backing chords on single manual
keyboards).
Lower to Upper +2: Press
four keys
simultaneously on upper manual while switching
SPLIT on to map lower to upper manual up to highest of all keys pressed. Lower notes
range is transposed two octaves up (useful for left-hand
16’ backing chords on single
manual keyboards).
3.2.2 Generator Group
TG Gears Tune
– sets organ generator tuning in range from A = 433 through 447 Hz
No DB1 @Perc
enables drawbar
1’ cancelling when percussion ON (as original B3®)
DB16 Foldback
– controls foldback behaviour on 16' lowest octave. Foldback is
configurable in 4 settings:
o
foldback with full level,
o
foldback with muted level (original B3 behaviour),
o
no foldback ("all way down") with full level (like H-100®) or
o
no foldback ("all way down") with muted level.
3.2.3 Preamp Group and Misc.
Along with ToneTrimPot (see above), adjusts behaviour and response of the emulated AO28
preamp chassis and transformer/tube saturation.
Swell Type
– controls preamp loudness behaviour on swell pedal changes:
o
Hammond AO28
(“deep” loudness curve)
o
Böhm/Wersi (shallow loudness curve)
o
Linear
SwellTrimCap
– adjusts organ output volume like the trim cap in B3 swell pedal control.
Higher values add more punch and output transformer saturation effects.
AO28 TubeAge
– controls emulated AO28 preamp tube aging (higher triode distortion k2 in
12BH7 output stage).
3.2.4 Commons Group
MIDI Channel
– sets MIDI base receive channel 1 to 10 (upper manual, lower manual is on
+1, pedals on +2).
MIDI Option
– sets MIDI routing behaviour to:
o
Local Tx
– own MIDI events are sent on MIDI OUT
o
Inp 1 Thru
– MIDI IN 1 is routed to MIDI OUT as THRU
o
Inp 2 Thru
– do not use
o
USB InThru
– USB MIDI IN is routed to MIDI OUT as THRU
