3.2 Defaults Group
Step downwards to navigate to various default settings; change to desired value by turning
incremental encoder knob. Save changes to current overall preset by pressing knob for more than
2 seconds.
ToneTrimPot
– mimics TONE pot on simulated AO28 amp; well, a little bit more on high
values.
TubeAmp Insrt
– activates 122 amp simulation, otherwise amp is bypassed. TubeAmp
Gain has no effect if off.
SpkrSim Insrt
– activates rotary cabinet simulation, otherwise horn/rotor simulation is
bypassed (recommended for use of external rotary cabinet).
Reverb Lvl 1
reverb amount of reverb program 1
Reverb Lvl 2
reverb amount of reverb program 2
Reverb Lvl 3
reverb amount of reverb program 3
Transpose
– allows transposition by up to +24 or -24 half note steps. Notes beyond 5
octave limits of console organ will not produce any sound due to accuracy of physical
model.
3.2.1 Split Configuration
Keyboard split default is
“pedal mapped to lower manual” on first 25 keys (console organ pedal
range, two octaves). Default split modes may be changed by menu:
Split Manual
– switches split mode on or off.
Split Mode
– default split setting on power-up, engaged when split set to ON.
o
'PedalToLower', map pedal to lower manual up to split point
o
'LowerToUpper', map lower to upper manual up to split point
o
'PedalToUpper', map pedal to upper manual up to split point
o
'Lo1', map lower to upper manual up to split point, transpose lower +1
octave
o
'Lo2' map lower to upper manual up to split point, transpose lower +2
octave
Split Point
– sets split point (when split is on) as key number (24 is second „C“ on manual).
Split point and split mode may also be changed by one of the following procedures:
Pedal to Lower: Press a
single key
on lower manual key while switching SPLIT on to
obtain a custom split point (useful for playing pedal bass lines on dual manual keyboards
without bass pedals).
Lower to Upper: Press a
single key
on upper manual while switching SPLIT on to map
lower to upper manual up to this key (useful for playing
16’ bass lines or 4’ backing chords
on single manual keyboards).
Pedal to Upper: Press
two keys
simultaneously on upper manual while switching SPLIT on
to map pedal to upper manual up to highest of both keys pressed (useful for playing pedal
bass lines on single manual keyboards without bass pedal).
