3.0 Menu Panel
On power on, the
presets/drawbar menu
is present. Pressing the rotary knob twice briefly will let
you return to the presets/drawbar menu from any other menu position. The menu system consists
of up to 120 entries, depending on licence.
Turn the rotary know to select overall
Common Presets
0 to 15. Overall presets consist of voice
numbers for upper manual, lower manual, and pedal, tab switch settings (percussion, vibrato etc.),
volume and 122 tube amp gain as well as all other sound defining parameters, except rotary
run/fast/slow. LEDs show current percussion and vibrato setting.
Press rotary knob once briefly to scroll through the menu. Up/down arrows are white (active) and
parameter arrow is outlined (inactive) in this mode. Press rotary knob again briefly to change an
entry. A white
“<” arrow indicates the selected entry that may be altered.
Alternatively you may use the up/down buttons to step through the menu (autorepeat when you
keep the button pressed).
Turn the rotary knob counterclockwise (or press the down button) to access upper (U), lower (L) or
pedal (P)
Voice Presets
.
40 voices (0
… 39) are available for each manual and pedal. Voices 0 to 15 contain the organ
drawbar settings. Voices 16 to 39 select a General MIDI (GM) preset. GM presets may be
predefined by use of the HX3.5 Editor application.
Common Presets only contain the Voice Preset number of each manual, not the drawbar setting
itself. This allows for saving a voice number from 16 up (GM voice) on a particular manual to a
Common Preset.
Scrolls upwards in the menu to the
TubeAmp Gain
setting. TubeAmp Gain sets volume of the
internal rotary tube amp simulation from 0 to full (overdriven tube amp). The simulated Amp will
get into decent saturation on increased swell amount and higher gain values as seen on
‘real’
amps. Amount of distortion is controlled by swell pedal.
A
“*” star appears on the display, if a parameter value has been changed and now differs from the
stored preset. To
store
values as
preset
, keep the encoder knob pressed until the prompt
“Saved
to Preset
#XX” appears on the display. (“XX” representing the current preset number). Parameters
tagged by the letter
“D” in the display may be stored
as defaults
. These parameter settings will be
applied to all other presets as well.
Voice settings will be stored along with the overall preset. Drawbar settings are being saved as
voices under the same number, while GM instruments will retain their selected numbers. You may
select any stored voice by choosing its number in the voice menu, and then modify the voice as
you like and play it live or store it again along with an overall preset.
3.1 Menu Upper/Lower/Pedal
Menu entry count depends on selected basic organ model (default: B3). Other organs (H100,
Böhm/Wersi, Versatile Electronic Gating, Conn Single Note Generator, CheesyCombo) are
available with extended licence only. Navigate to
Organ Model
in the menu to alter the basic
organ model. On B3 and Combo organ models, mixture drawbars are not active.
Starting from the preset/drawbar menu turn the rotary know counterclockwise (or press the down
button) to navigate to the voice settings for upper manual, lower manual, and pedal. The white
„<“
arrow points to the selected manual.
DrbXXXXXXXXXXXX
- voice menu, shows upper/lower or pedal drawbar settings as
numbers 0
… 8 (here represented as "X") for 12 drawbars (9 harmonics plus 3 mixtures).
Turn the rotary knob to alter a voice setting. To alter individual drawbar settings, step
further in the menu.
