2
CHANGE HEATING TIME SETTING
Press “SET TIME” button to adjust the heating time. Press “▲”or “▼” to
adjust minute value in the range of 1
～
60. Press “SET TIME” again to confirm.
For example, the default heating time is 45 minutes, and displayed as “–45”.
CHANGE WAITING TIME SETTING
Hold “ SET TIME ” button for more than 5 seconds to adjust the waiting time.
The maximum waiting time is 12 hours. Led screen blinks and display the
waiting hours. Press “▲” to adjust hour value, press “▼” to adjust the minute
value. If you wish to set 8 hours and 45 minutes waiting time, you need to set the
hour value as “ H8 ” and minute value as “ – 45 ”. Press “ SET TIME ” again to
confirm you setting.
DISPLAY AND LIGTH INDICATOR
In waiting mode, Led screen displays the hour (such as H10) and minute
(such as – 45) information by turns. If the wait time is less than 1 hour, only
minute information is displayed. Once the waiting time is up, system enters
heating-up mode automatically. Led screen displays the current temperature,
right and left side led lights indicate the remaining working time in the following
manner: each light indicates a 6-minute interval and starting from the right side
button light. For example: 2 bottom lights on the left and 5 lights on the right will
be on for 38 minutes.
OTHER INFORMATION
The default setting temperature is 167
℉
(75
℃
)
，
default waiting time is 0
and heating-up time is 45 minutes.
Temperature display range is 43
－
221
℉
(6
－
105
℃
).
Temperature adjusting range is 158
－
194
℉
(70
－
90
℃
).
Light switch
：
Press this button to turn on/off the light.
Fan switch
：
Press this button to turn on/off fan for ventilation.
Содержание CON3
Страница 1: ...CON3 140621...
