Key Digital KD-X222PO Скачать руководство пользователя страница 15

13

 Important Product Warnings:

1. 

Connect all cables before providing power to the unit .

2. 

Test for proper operation before securing unit behind walls or in hard to access spaces .

3. 

If installing the unit into wall or mounting bracket into sheet-rock, provide proper screw support 
with bolts or sheet-rock anchors .

 Safety Instructions:

Please be sure to follow these instructions for safe operation of your unit.

1. 

Read and follow all instructions . Heed all warnings .

2. 

Do not use this device near water . Clean only with dry cloth .

3. 

Install in accordance with the manufacturer’s instructions .

4. 

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus 
(including amplifiers) that produce heat .

5. 

Only use attachments/accessories specified by the manufacturer .

6. 

Refer all servicing to qualified service personnel . Servicing is required when the device has been 
damaged in any way including:

 

»

Damage to the power supply or power plug

 

»

Exposure to rain or moisture

 Power Supply Use:

You MUST use the Power Supply 

PROVIDED

 with your unit or you 

VOID

 the Key Digital

®

 Warranty 

and risk damage to your unit and associated equipment.

Contacting Key Digital

®

Technical Support 

For technical questions about using Key Digital

®

 products, please contact us at: 

 

Phone:  914-667-9700 or E-mail: tech@keydigital .com

Repairs and Warranty Service 

Should your product require warranty service or repair, please obtain a Key Digital

®

 Return Material 

Authorization (RMA) number by contacting us at: 

 

Phone:  914-667-9700 or E-mail: rma@keydigital .com

Warranty Information

All Key Digital

®

 products are built to high manufacturing standards and should provide years of trouble-

free operation .  They are backed by a Key Digital Limited 3 Year Product Warranty Policy .  

http://www .keydigital .com/warranty .htm

Содержание KD-X222PO

















Отзывы: