8
Settings
EDID Control
EDID authentication is provided from the KD-X222/ KD-X222PO Tx unit to the connected input / source
device . The EDID file (AKA “handshake”) is selected using the EDID Control rotary on the Tx unit and
provides a list of compatible video and audio formats as well as digital data, informing the source device
what it should output . Most sources will comply with a new EDID file without a power-cycle, but each
source may behave differently .
Default EDID Control Table, selected via EDID Control rotary
Position
EDID Description
EDID Control Rotary
0
Copy EDID from CAT5e/6 Output
IMPORTANT! Please apply
light pressure to the Control
rotary when making your
selection
1
1080i, 2CH AUDIO
2
1080i, DOLBY/DTS 5 .1
3
1080i, HD AUDIO
4
1080p, 2CH AUDIO
5
1080p, DOLBY/DTS 5 .1
6
1080p, HD AUDIO
7
4Kx2K@30, 2CH AUDIO
8
4Kx2K@30, DOLBY/DTS 5 .1
9
4Kx2K@30, HD AUDIO
A
4Kx2K@60, 2CH AUDIO
B
4Kx2K@60, DOLBY/DTS 5 .1
C
4Kx2K@60, HD AUDIO
D
1280x720p@60 DVI (no audio)
E
1920x1080@30 DVI (no audio)
F
3840x2160p@30 DVI (no audio)
Control Rotary
The Control rotary enables the integrator to choose the desired setting for IR Out
(RS-232) ports, RS-232 Mode, and Hot Plug Detection control .
The Control Rotary is located on the Tx unit.
›
IMPORTANT! Please apply light pressure to the Control rotary when making
your selection
