11
Pin
Signal
Corresponding Wire (Accessory)
Rx unit Phoenix connector
IR Emitter
4
IR Out Signal / RS-232 TxD
Dashed (IR emitter)
5
IR Out Ground /
RS-232 Ground
Solid (IR emitter)
6
RS-232 RxD
N/A
Connection protocol is as follows:
»
Baud Rate = 57600 bits per second
»
Data Bits = 8
»
Stop Bits = 1
»
Parity = None
»
Flow Control = None
»
Carriage Return: Required
»
Line Feed: Required
Commands are not case-sensitive. Spaces shown below may be excluded. Carriage return
and line feed is required at the end of each string.
Status Command:
KD-X222PO > STA
-------------------------------------------------------------------------
-- Key Digital Systems STATUS --
-------------------------------------------------------------------------
-- KD-X222PO System Address : 00 F/W Version : 1.00 --
-- RS232 : Baud Rate=57600bps, Data=8bit, Parity=None, Stop=1bit --
-- Running Day : 000, Time : 00:03 --
-- HD-BaseT Mode : Normal , Link = ON , Auto Reset = ON --
-- --
-- Video Input Status --
-- EDID = 00, PWR5V = ON , Link = ON , HDCP = 2.x, Video = HDMI --
-- --
-- CAT5e/6 Video Output Status --
-- DISP = SAM 2014, HPD = ON , HDCP = ON , DDC = GOOD, OUT = ON , HDMI--
-------------------------------------------------------------------------
