KD-MSW4x2Pro Operating Instructions
Page 4
KD-MSW4x2Pro Operating Instructions
Page
Compatible Video Signals
Compatible with all standard analog video signal formats that use 50 Hz or 60 Hz refresh rates,
including:
1080p, 1080i, 720p, 576p, 576i, 540p, 480p, 480i
Video Characteristics
Output stage drives high-quality, equal-length video cables up to 300’ or more
1V p-p @ 75 ohms, terminated
Composite video sync on “Y” input (YPbPr)
Video bandwidth:
-3 dB @ 300 MHz
Linear phase pass-band
Unity video gain
Input terminations: for proper operation of the high quality electrical circuits in the
KD-MSW4x2Pro unit, do NOT “daisy chain” inputs:
Each input of the KD-MSW4x2Pro has its own 75 ohm termination
Do NOT feed a source to multiple KD-MSW4x2Pro inputs without proper distribution
equipment
Analog Audio Characteristics
Left and Right stereo on two BNC connectors
High-impedance (1K ohm) line level inputs
Analog Audio Volume Control with Muting provided
Analog Audio is not supported for RGBHV video applications:
Connectors are used for H&V
Digital Audio Characteristics
Standard digital PCM coax format on one BNC connector
Control and Monitoring
Select one of four input sources for each of the two outputs
Front-panel LEDs indicate the selected input, for each output
Control via:
Front panel pushbuttons
IR remote control, with extensive commands and control
IR Extender
Wired IR
All control systems with RS-232 (cable supplied only with Fat Boy expansions)
›
➔
›
›
›
›
➔
➔
›
›
➔
➔
›
›
›
›
➔
›
›
➔
›
➔
➔
➔
➔
➔
Input/output Ports and Formats
The output format = the format of the selected input source
Each Input and Output Port is comprised of six (6) BNC connectors :
3 analog video connectors
2 analog audio connectors
The analog audio input/output connectors also serve as the horizontal and vertical sync
for RGBHV signals
1 PCM digital coax audio connector
Each Port supports:
YPbPr component video, analog stereo left and right audio, and digital PCM audio
RGBHV video and digital PCM audio
RGB video with sync on the green channel, analog stereo left and right audio, and digital PCM
audio
S-Video and composite video (CVBS), with adapters
Each connector can accommodate various signals, on a shared basis:
PR/R Connector:
Pr label is for component video
R label is for the red channel for RGBHV video
Y/G Connector:
Y label is for component video
G label is for the green channel for RGBHV video
Pb/B Connector:
Pb label is for component video
B label is for the blue channel for RGBHV video
L/H Connector:
L label is for the left analog stereo audio channel
H label is for the horizontal sync for RGBHV video
R/V Connector (Right analog stereo audio, or vertical sync for RGBHV video)
R label is for the right analog stereo audio channel
V label is for the vertical sync for RGBHV video
PCM Connector:
For PCM digital coax audio
Resolution
The output resolution = the resolution of the selected input source
Handles all HD and SD resolutions (50 and 60 Hz) including 1080p/60
Supports analog video bandwidths up to 300 MHz
Performs no video or audio processing:
Introduces no degradation in video or audio signal quality
›
›
➔
➔
»
➔
›
➔
➔
➔
➔
›
➔
»
»
➔
»
»
➔
»
»
➔
»
»
➔
»
»
➔
»
›
›
›
›
➔
MSW4x2Pro_Manual.indd 34-35
8/23/06 4:11:05 PM