Key Digital KD-MSW4x2Pro, Руководство по эксплуатации, Страница: 17 / 20

KD-MSW4x2Pro Operating Instructions
Page 0
KD-MSW4x2Pro Operating Instructions
Page
Address command:
CCA<number (1~9)>
CCA1~8 :
Selects the KD-MSW4x2Pro unit corresponding to that predetermined
numerical address
note:
“9” is the default address of the stand alone / base unit and does not
require selection
Example:
CCA5 sets the address to “5”
The user must then press “5” to select/change a different source input on that unit
IR 5
‡
output 1
‡
3 links output 1 to input 3
Video & Audio Mute command:
IR : R1 ‡ output(1~2) ‡ Up arrow : Enable Mute
R1
‡
output(1~2)
‡
Down arrow : Disable Mute
Example:
R1
‡
output 1
‡
Up arrow : output 1 is muted
note: R1
‡
U4
‡
Up arrow mutes every output
RS-232: CCm<number(1~3)> : Enable mute
CCn<number(1~3)> : Disable mute
Fade to Black interval set up command:
Period that will be muted is twice the interval
CCi<number(0~9)>
CCI0 : No mute
CCI1 : 28 ms mute
CCI2 : 40 ms mute
CCI3 : 80 ms mute
CCI4 : 120 ms mute
CCI5 : 160 ms mute
CCI6 : 240 ms mute
CCI7 : 320 ms mute
CCI8 : 400 ms mute
CCI9 : 600 ms mute
Power on/off:
s : Power OFF the KD-MSW4x2Pro unit
q : Power ON the KD-MSW4x2Pro unit
3.
4.
5.
6.
RS-232 Commands and Protocol
The KD-MSW4x2Pro 4-to-2 HDTV Matrix Switcher can also be remotely controlled via its RS-232
port by systems such as Crestron, AMX, ELAN, and Control4, utilizing industry standard commands
PROTOCOL:
4800 Baud rate
8 data bits
1 Stop bit
No parity
RS-232 Cable
Carefully insert an RS-232 cable (9-pin) to the back of the unit, and to an appropriate PC
or Control System.
The RS-232 Command List for the KD-MSW4x2Pro HDTV Switcher is as follows:
I/o switching command:
CCxy
x = output position (1...2), y = input position (1...4)
Status command:
CCww
note: Since both commands are of a defined length, no terminator is required.
Both commands give the following response:
a) UUy1y2y
b) Y1y2y3y4 – input states (1...4)
›
›
›
›
1.
2.
note: If applicable, Key Digita ™ Fat Boy KD-MSW4x2Pro expansion units come preconfigured from the factory with
their own RS-232 cable
Fat Boy Expansion Applications
The KD-MSW4x2Pro can be used as a “stand-alone” 4-to-2 HDTV Matrix Switcher. Fat Boy
expansions have multiple KD-MSW4x2Pro units pre-wired from the factory, and each unit in the
expansion is individually addressable.
For all of the RS-232 Commands described below used in Fat Boy expansion
applications, the user MuST type the unit address ( 1 ~ 8 ) instead of ‘CC’.
MSW4x2Pro_Manual.indd 30-31 8/23/06 4:11:02 PM