Kewtech KT77 Скачать руководство пользователя страница 9

16

www.kewtechcorp.com

17

www.kewtechcorp.com

www.kewtechcorp.com

The user is provided with a 320 x 240 1/4 VGA Graphical Liquid Crystal 
Display (LCD).  The keyboard consists of an alphanumeric keyboard, 
together with specific function keys.  To the bottom of the screen are five 
function keys, which allow the user fast access to options displayed on the 
Display
There are four cursor keys used to navigate the menus.
To the bottom of the keyboard are the two main function keys, which 
perform, execute and cancel function as well as Start and Stop.
The Kewtech KT77 also has the ability to use non-standard characters which 
can be displayed by pressing the ‘Symbols’ key during text entry. Simply 
use the cursor keys to highlight the required character and press the Green 
button. You can also use numeric keys 1-9 to move you to extreme points of 
the symbol matrix.

The Shift can also be used when editing text

shift and

result

left key

Go to start of line

right key

Go to end of line

up key

Go to start of text

down key

Go to end of text

delete key

Delete character under cursor

defInITIons

Equipment Under Test  The electrical / electronic apparatus   (EUT)   
 

which is the subject of testing.

Powered Tests -  

The EUT is supplied with mains voltage, with   

 

measurement being taken of leakage currents.

Fast keys -  

The five keys directly under the screen.These are  

 

used to select menu options displayed on the  

 

screen.

Tester -   

The Kewtech KT77 Portable Appliance Tester  

Un-powered Tests  -  

The EUT is the subject of electrical tests  

 

 

using stimuli generated within the Tester.  

 

 

The EUT is not provided with mains power. 

User -  

The test technician using the Tester to perform  

 

tests on a EUT

DEFINITIONS

KEYBOARD AND PANEL

Содержание KT77






















































Отзывы: