2
measurements. Return to Kewtech for repair.
1.9 This meter has been designed with your safety in mind.
However, no design can completely protect against
incorrect use. Electrical circuits can be dangerous and/or
lethal when a lack of caution or poor safety practice is used.
Use caution in the presence of voltages above 33V as these
pose a shock hazard.
1.10 Pay attention to cautions and warnings which will inform
you of potentially dangerous procedures.
1.11 Never assume an installation circuit is not live. Confirm it is
de-energized before commencing testing using a suitable
tester.
1.12 Replace worn and/or damaged leads with new ones
approved by Kewtech immediately. Only use accessories
recommended by Kewtech as they are designed to work
with the tester. The use of any other items is prohibited as
they may not have the same safety features built in, and may
degrade performance.
1.13 Users of this equipment and/or their employers are
reminded that Health and Safety Legislation require them to
carry out valid risk assessments of all electrical work so as
to identify potential sources of electrical danger and risk of
electrical injury such as from inadvertent short circuits.
Where the assessments show that the risk is significant then
the use of fused test leads constructed in accordance with
HSE guidance note GS38 Electrical test Equipment for use
by Electricians should be used.
