Keurig Commercial K-Cup Series, Руководство пользователя

Страница: 11 / 28

11
Service
Beyond these recommended cleaning and maintenance procedures this
brewer is not user serviceable, for service please refer to the Warranty
section in this guide.
SECTION 4
Troubleshooting
SITUATION
Brewer does not have
power
Brewer will not brew
when used for the
first time
Brewer will not brew
Brewing a partial cup
Brewer shuts off
automatically
SOLUTION
• Plug brewer into an independent outlet.
• Check to be sure that it is plugged in securely.
• Make sure the Power Button is pressed and is
illuminated.
• Reset circuit breaker if necessary.
• Plug into a different outlet.
• If brewer is cold/frozen, wait for at least two
hours for it to reach room temperature before
powering on.
• Check to make sure there is water in the
Water Tank.
• Place a mug on the Drip Tray Plate.
• Check to be sure you are not using a clear, glass
mug. Cup sensor will not “read” the glass mug
and the PLACE CUP Light will flash.
• The exit needle may be clogged (refer to page 9).
• Clean the K-Cup
® Pod Holder if necessary and
rinse under faucet (refer to page 9).
• Descale the brewer (refer to page 9).
• If you have repeated the descale procedure on
your brewer two times and the brewer is still not
brewing, contact Customer Service at
1.888.CUP.BREW (287.2739).
• Check to make sure that there is a mug on the
Drip Tray Plate.