13
Emptying the
K-Cup
®
Pod Bin
The used K-Cup
®
pods are
automatically ejected into the internal
K-Cup
®
Pod Bin. When the K-Cup
®
Pod
Bin requires emptying the brewer LCD
Screen will display "EMPTY K-CUP
POD BIN."
To empty the K-Cup
®
Pod Bin open the
brewer door by grasping the door
handle and swinging the door fully open
to remove the K-Cup
®
Pod Bin from
drawer (fig. 17). Dispose used K-Cup
®
pods and replace he K-Cup
®
Pod Bin.
Emptying the Drip Tray
To empty the Drip Tray grasp the Drip
Tray by the side as shown and pull it
towards you. This disengages the Drip
Tray, which can now be emptied and
returned back in place. Keep the Drip
Tray level at all times to avoid spilling.
Descaling Your Brewer
Depending on the mineral content of your water, calcium deposits or scale
may build up in your brewer. Scale is non-toxic but if left unattended can
hinder brewer performance. Regularly descaling your brewer every 3-6
months helps maintain the heating element, and other internal parts that
come in contact with water. Calcium deposits may build up faster, making it
necessary to descale more often.
Before you begin, you will need a large ceramic mug, fresh water, descale
solution, and access to a sink. Do not use a paper cup.
Properly follow the descaling procedure.
fig.
17
fig.
18
Descaling Procedure
STEP 1: PREPARE
• Make sure you have at least 80 oz.
(approximately 6 bottles) of undiluted
Keurig
™
Descaling Solution on hand. You
will also need an empty sink, a ceramic mug
(do not use a paper cup) and a Flojet pump
(#50-200358-000) or a similar device.
• Disconnect the brewer from the water supply
and power it off. Drain both the hot and cold
water tanks (fig. 20). When empty clip the
drain tubes back into place and replace the
Drain Plugs.
fig.
19
