|
|
ENGLISH 43
DISTANCE INTERVAL WORKOUT SCREENS
For DISTANCE INTERVAL workouts the following screen shall be provided during the work-
out.
Similar to the standard workout screen, the user shall have the ability to switch between
showing Watts, Speed, RPM, or Heart Rate in the Key Metrics Zone. The WORKOUTS
button shall be used to select the data to display in the Key Metrics Zone. In the example
above, watts are shown in the Key Metrics Zone.
The following fields are present:
•
Time – The elapsed time for the workout in MM:SS format
•
Distance – The distance, in kilometers or miles, remaining for the applicable WORK or
REST segment of the given workout
•
Energy – The amount of KCAL/KJ the user has burned through the workout
•
Watt – The current amount of power the user is exerting
•
RPM – The current cadence the user is pedaling
•
Speed – The current speed the user is “traveling” at
•
Heart Rate – The user’s current heart rate as measured from their wireless HR strap
•
Work (X / Y) – The initial value for WORK was established during program setup; the X
denotes the current segment number while the Y denotes the total number of segments
that will be run in the current workout and was defined in program setup; the example
above on the left shows “WORK (01 / 08)” signifying that the first segment is in process
and there are 8 total segments in the workout; the WORK segment would be followed by
the REST segment (screen shown on right above)
•
Rest (X / Y) – The initial value for REST was established during program setup; the X
denotes the current segment number while the Y denotes the total number of segments
that will be run in the current workout and was defined in program setup; the REST seg
-
ment follows the WORK segment; the X shall increment to the next segment once the
current REST segment has been completed
•
Level – The current resistance level setting shall be displayed in the same area of the
LCD as the WORK and REST Interval information. The level shall be displayed during the
first 3 seconds of the workout and anytime the level is changed by the user during the
workout. Whenever the level is displayed, it shall only be displayed for 3 seconds. Note
that the value however for level shall be determined based on the current position of the
magnets.
Transition From
WORK To REST
Segment Of Interval
Transition To
New Interval
Содержание BK1054-600
Страница 75: ... ...
