MY20K04-2_1.0_19.08.2019
141
Maintenance
Please contact your specialist dealer immediately
in the case of an ongoing "soft fault" or a "hard
fault".
Colour
Meaning
Green
The status screen briefly flashes green after the
drive pack has been successfully installed in the
bicycle. This gives you a visual signal that the
system can now be switched on.
Yellow
The status screen briefly turns yellow when a "soft
fault" is detected. This means that there is a
temporary or non-critical disturbance, which in most
cases leads to a loss of performance. In the event
of a "soft fault", you can still ride your bicycle.
However, this is not recommended.
Red
The status screen briefly turns red when a "hard
fault" is detected. In the event of a "hard fault", the
bicycle cannot be operated and must be serviced.
Table 27:
Meaning of status screen colours
"Soft faults" on the bicycle are most commonly caused
by missing data from the speed sensor.
In the case of a permanent "soft fault", you can re-
install the speed sensor magnets. If the problem
persists, please contact your FAZUA service partner
or visit the FAZUA service platform
(www.fazua.com/service).
For a permanent "hard fault", please contact your
FAZUA service partner or visit the FAZUA service
platform (www.fazua.com/service)
EN_MY20K04-2_0.01_09.18_KETTLER FAZUA.book Page 141 Monday, August 19, 2019 1:53 PM
