19
(4) Enter a number for the correction coefficient A (0.1 to 1.9). The default
value is "1.0". In this case, "1.1" is entered for the correction coefficient A.
Successively press keys in the order of
→
.
(5) Enter a number for the correction coefficient B (-9.9 to 9.9). The default
value is "0.0". In this case, "1.0" is entered for the correction coefficient B.
Successively press keys in the order of
→
.
(6) After the entry is completed, the unit is in the state where the
registered calibration curve is selected. Pressing the
or
key enables measurement.
* When user correction coefficient is viewed by a calibration curve
number, conduct the steps (2) to (5), enter the calibration curve number
to be viewed, and view the displayed coefficient.
