10
7-1. Measurement
(1) Press the
key to turn on the power. All elements of the LCD
will be displayed for about 3 seconds. Subsequently, "calibration curve
name," and "%" will be displayed.
* At this time, if the display shows something other than the above, this
unit may be in the abnormal state. Refer to “9. Warnings and Errors" on
page 20.
(2) Select the number of the calibration curve to be measured. This
instrument has only one pre-installed calibration curve, but this
function is required when a user calibration curve is created.
<Calibration curve No. 01: For the pre-installed calibration curve>
Successively press keys in the order of
→
→
.
<Calibration curve No. 02: For user calibrations>
Successively press keys in the order of
→
→
.
7. Directions
<Calibration curve No. 01: Selection screen>
<Calibration curve No. 02: Selection screen>
