20
The following warnings and errors are displayed when an abnormality is present in this unit or the measurement condition.
9. Warnings and Errors
Display
Description
-5℃
This indication is displayed when the temperature of this unit decreases to -5°C or less. It is measurable.
50℃
This indication is displayed when the temperature of this unit increases to 50℃ or more. It is measurable.
001
There is a problem with the temperature sensor. Servicing is required. The power is turned off after error
display (in 4 seconds).
002
There is a problem with the electronic circuit used for moisture measurement. Servicing is required. The
power is turned off after error display (in 4 seconds).
HI
(always)
If the measurement value is always displayed as "HI", an abnormality may occurs in this unit.
Press the [ON/OFF] key to turn on the power.
Direct the bar sensor in the air with the sensing part untouched, and
press the [7] or [9] key.
If "HI" is displayed even after the operation above, repair is needed.
Lo
(always)
If the measurement value is always displayed as "Lo", an abnormality may occurs in this unit.
Press the [ON/OFF] key to turn on the power.
Press the [7] or [9] key while holding the sensing part of the bar sensor.
If "Lo" is displayed even after the operation above, repair is needed.
The sensing part is the tip metal
and the metal portion at the bottom
side thereof. Hold them together.
