14
⑩
Turning on the power
Turn on the power switch located at the rear of the unit.
A beep sounds, and all contents are displayed. After that,
the power supply voltage that has been automatically
detected by the instrument is displayed with "CHE5",
"CHE4", ... and "CHE0".
When the power is turned on for the first time after purchase
or when the instrument is used with a power supply voltage
other than the previous voltage, the power supply voltage is
displayed with "-----".
After ensuring that the power supply voltage is correct by,
press the [
Enter
] key.
The screen changes to the weight display screen with a
beep.
If the power supply voltage that has been automatically
detected by the instrument is wrong, or if the instrument
cannot automatically detect the power supply voltage and “Er
701” is displayed (see page 42), follow the procedure below
to perform manual setting.
When the power is turned on for the first time,
ensure that the power supply voltage is correct and
press the [
Enter
] key.
■ How to manually specify the power supply voltage
Turn on the power while holding the [
Menu
] key down.
A beep sounds, "All contents displayed" → "CHE5" → "-----" are
displayed, and the power supply voltage is displayed.
When the power conversion switch is set to 100 - 120 V or 220 -
240 V, "100" or "220" is displayed respectively.
* If "Er 701" is displayed, selection with the power conversion
switch is wrong. Make a selection with the switch correctly
(see
3
on page 12).
Make a selection of the power supply voltage in accordance with
the power supply voltage to be used.
Press the [
Select
] key to select a power supply voltage.
Applicable voltage
• 100 - 120 V: 100 V/110 V/120 V
• 200 - 240 V: 220 V/230 V/240 V
After selection, press the [
Enter
] key.
Turn on the power while holding the [
Menu
] key down.
After selection, press the [
Enter
] key.
"CHE4", "CHE3", ..., and "CHE0" are displayed, and the screen
changes to the weight display screen with a beep.
The measuring mode (see page 22) is displayed on the setting
value display.
Made in Japan
SER No. BC10001
＋
Beep
①
②
Beep
