13
⑥
Placing the sample dish
Gently place the sample dish on the sample dish stand.
* Put the sample dish on the proper place on the sample
dish stand, and be careful not to put the dish on the edge
of the stand.
⑦
Close the heater lid
⑧
Connecting the power cord
Connect the power supply cord to the power supply input
on the rear panel. After that, plug the power cord into a
100 VAC wall outlet.
⑨
Connecting the printer (option)
When a printer is used, use the printer-specific cable that
is supplied with the printer. Connect the cable to the RS-
232C output terminal.
Refer to "the VZ-330 Printer User’s Manual" supplied with
the printer for descriptions about the printer.
* Some parts must be oriented in a fixed direction for
assembly. Note that placing parts in the wrong direction
may result in errors in operation or in erroneous readings
being obtained, and that you should take care that all parts
are put into place in their proper positions.
AC inlet
RS-232C output terminal
