23
9. Replacment for lamp
AN-820 uses tangsten lamp as an optical power.
In case that lamp goes defective, replace lamp according to the following procedure.
Operation
Display
Explanation
1. Turn the power switch “OFF”.
[
] means, turn [OFF]
2. Remove cover behind main body
by loosing two screws.
3. Remove lamp connector .
4. Remove two lamp fix screws.
5. Put new lanp into the correct
position and fix two lamp fixing
screws. Connect lamp connector
and put cover and two cover
screws.
Note : Whenever the lamp is replaced, Bias adjust should be done.
Содержание AN-820
