background image

23

Update –Setting Update to Yes inputs live 
measurements for temperature, pressure, and relative 
humidity into the ballistic solver. Selecting No for 
Update captures current environmental inputs and 
makes them user editable.
Lat – Latitude.  Can be found on a map or internet 
search for your area . 
Temp – Ambient Temperature is the temperature 
measured at the external temperature sensor.
SP – Station Pressure (Absolute Pressure) is the pressure 
exerted by the earth’s atmosphere at any given point. 
RH – Relative Humidity is the amount of moisture 
currently held by the air as a percentage of the total 
possible moisture that the air could hold.
Dalt - Density Altitude is the altitude at which the 
density of the theoretical standard atmospheric 
conditions (ISA) would match the actual local air density.
SpnDft – Spin Drift is a correction for lateral drift caused 
by the change to the bullets axis of rotation as it follows 
the arc of its trajectory.  (Not available in Sportsman 
models)
Wcap – Wind Capture  toggles between applying the 
windage correction to just the currently selected target 
or to all targets. 

Range Card is available on Elite Model only.
Range –
 Range is the distance to target
Elv – Elevation is the vertical correction needed to hit a 
target at a given range.
Wnd1 – Windage 1 is the horizontal correction needed to 
hit a target at a given range and average measured wind 
speed.
Wnd2 – Windage 2 is the horizontal correction needed 
to hit a target at a given range and maximum measured 
wind speed.
Lead – Lead is the horizontal correction needed to hit a 
target moving left or right at a given speed.
RemV – Remaining Velocity is the amount of a bullet’s 
initial velocity retained at a given distance.
RemE – Remaining Energy is the amount of a bullets initial 
energy retained at a given distance.
Rtrns – Transonic Range is the distance traveled by the 
bullet at which it slows to transonic speed (Mach 1.2).
Trce - Trace is the height above the Elevation solution 
where the trace of the bullet will be most visible. (Trace 
value shown in Range Card is optimized for calculation 
speed and may differ slightly from Trace value in Ballistics 
Menu which is optimized for accuracy.)

ENVIRONMENT MENU

BALLISTICS/RANGE CARD MENU

Shop for Quality products online at:

1.800.561.8187

www.

SCOUTBASECAMP

.ca

Содержание 0857AFDE



























Отзывы: