support.kesslercrane.com
Page 25 of 33
USER GUIDE
SETTING UP A MOVE
CINESHOOTER SYSTEM
STOP MOTION
Set values for
#PHOTOS
&
RAMP:
•
#PHOTOS
- Indicates the number of photographs taken during the entirety of the move
•
RAMP
– Percentage value indicates the change in speed of the movement over the entire
move. The frame value to the right shows how many images until the system gets up to
the top speed or how many images until the camera comes to a stop.
Select
AUTO ADVANCE
or Manual
ADVANCE
by pressing Enter to toggle selections.
•
Auto Advance - In this mode, after the camera fires, the system will automatically
advance to the next position in the movement.
•
Manual Advance - After firing the photo, move the joystick Left or Right to move the
camera into the next/previous position in the move.
Select
NEXT
by pressing Enter on the joystick.
Select
SN AP
to trigger the camera and repeat for auto advance.
Select
SN AP
to trigger the camera. Press Left or Right on the joystick to move the
camera into the next/previous position for manual advance. Repeat.
2.
3.
4a.
4b.
1.
