support.kesslercrane.com
Page 11 of 33
USER GUIDE
ACCESSORY INSTALLATION
CINESHOOTER SYSTEM
Using the provided screws and allen wrench, install
the Smart Handle Module to the battery plate end of
the CineShooter.
Run the coiled cable along the base of the
CineShooter and plug the jack into the “In” port on
the ports panel of the CineShooter Pan and Tilt Head
1.
SMART HANDLE MODULE
The Smart Handle Module is intended to function as both a grab point for carrying and
adjusting your CIneShooter Pan & Tilt Head, as well as an interface to enable and interract with
the FreeMotion feature.
2.
1.
2.
3.
INSTALLATION
OPERATION
NOTE:
The Smart Button only activates FreeMotion when programming a move, otherwise the function is disengaged
and the Smart Button will not free up the motors.
To operate, begin by programming a new camera move.
Once SET 1ST KEY FRAME is displayed on screen, press and hold the FreeMotion button
on the Smart Handle with one hand, and position the camera mounted to the L-Bracket or
H-Frame to desired position with the other hand, sliding along the slider (if using one).
Once the camera is in the desired position, let go of the FreeMotion button on the Smart
Handle. Then hit Enter on the joystick to set your first position. Repeat step 2 until desired
number of keyframes are set.
