support.kesslercrane.com
Page 23 of 33
USER GUIDE
SETTING UP A MOVE
CINESHOOTER SYSTEM
Once a camera move has been programmed (either a
PROGRAM MOVE, MANUAL MOVE,
or
TURNTABLE
MOVE) choose one of the following shooting modes:
•
LOOP/SCRUB
•
TIME LAPSE
•
STOP MOTION
LOOP/SCRUB
Set
TIME
and
RAMP
values by selecting with Enter and adjusting Up and
Down on the joystick:
•
Time – The amount of time it will take to complete an entire camera move.
•
Ramp – Percentage value indicates the change in speed of the movement over the entire
move. Often described as an “ease in” and “ease out”, the indicated time value shows how
fast/slow the system gets up to the top speed or how fast/slow the camera comes to a
stop.
•
Press ENTER to select
RUN
.
•
Scrubbing – Press ENTER while Looping to enter SCRUB mode. This feature will allow you to
manually advance the position of the Slide, Pan & Tilt axis within the programmed move by holding the
LEFT or RIGHT arrow button.
2.
1.
FIG. A
CAMERA MOVEMENT BEHAVIOR
