53
2. domaine d'emploi
Dans les cas a) et b), l'eau pluviale des séparateurs est
destinée a être déversées dans les systèmes d'assainisse-
ment publics.
Pour autant que l'eau pluviale rejoigne des nappes phréa-
tique
des conduites, ceci n'est possible dans un cas isole qu'âpres
la purification d'une telle conduite et / ou de demandes sup-
plémentaires nécessaires auprès du service public d'eau
local. Les séparateurs qui sont utilisés dans le cas d) se trou-
vent dans des installations destinées a la restriction des hy-
drocarbures dans les eaux usées contenant de l'huile minéra-
le au sens de la pièce E, paragraphe 2 de l'annexe 49 du
décret sur les eaux usées. La valeur de 20 mg/l exigée, d'â-
pres le droit des eaux, dans les cas c) et d) pour des hydro-
carbures est considérée comme respectée.
2.2 description de l'installation
La figure montre une citerne de séparateur d'hydrocarbure,
enterrée de classe A/B.
햲
Lieu de sortie sans siphon
햳
Séparateur de liquides volatils
햴
Arrivée avec siphon
햵
Sortie avec fermeture automatique
햶
Tube principal
햷
Flotteur
햸
Rehausse
햹
Couvercle
햺
Puits de prélèvement
햻
Protection de refoulement
2.3 description du fonctionnement
Sous l'action de la pesanteur, les séparateurs provoquent
une
séparation des eaux usées des liquides volatils et de la vase.
Par liquides volatils, il faut comprendre des liquides d'origine
minérale avec une densité ≤ 0,95 g/cm3 qui ne sont pas ou
peu solubles dans l'eau et insaponifiables. N'en font pas par-
ties les émulsions stables, les graisses et les huiles d'origine
végétale ou animale. Les liquides volatils flottent dans l'espa-
ce de dégraissage et s'accumulent a la surface. Les boues
qui sont plus lourdes que l'eau se déposent au fond et forment
une couche de vase.
Les séparateurs avec filtre a coalescence fonctionnent
comme les séparateurs d'hydrocarbure, selon le principe de
pesanteur. Pour l'augmenter l'efficacité de séparation, un filtre
a coalescence est place en plus dans la cuve. Ce filtre en
forme de cylindre a deux fonctions. D'une part, il influence le
courant dans le séparateur, d'autre part, il "filtre" au travers
du matériau coalescent toutes les eaux usées.
Si ce tissu de filtre est envahi par des eaux usées contenant
de l'huile, les gouttelettes d´huiles ne se séparent plus et en
raison de la force de pesanteur se rassemblent sur le
matériau coalescent pour former de grandes gouttes. Lors-
que celles-ci ont atteint une taille plus résistante, elles se
détachent du matériel de filtrage et remontent a la surface.
Les séparateurs de liquides volatils sont équipes en série
d'une fermeture automatique.
Si le débit maximal du récupérateur d'huile est dépasse, le
mécanisme ferme la sortie vers la canalisation. La sortie des
liquides volatils dans la canalisation est empêchée. Ce dis-
positif de sécurité se compose d'un tube principal rempli d'eau
dans lequel se trouve un flotteur.
Le flotteur est taré de telle sorte qu'il flotte à la surface et bais-
sedans le liquide volatil (jusqu'a une densité de 0,95 g/cm3).
Si le débit maximal du récupérateur d'huile maximum est at-
teint,l'huile passe par les ouvertures latérales dans le tube a
flotteur. Le flotteur s'abaisse alors vers le bas et ferme la
sortie du séparateur.
La fermeture automatique d'un séparateur déclenche un "sig-
nal d'alarme". S'il se déclenche en cas d'avarie, le séparateur
est a considère comme étant hors service, une intervention
est impératif.
햸
햹
햶
햺
햻
햳
햷
햵
햴
햲
Содержание 99403.10B
Страница 144: ...12 DOP Deklaracja wla ciwo ci 144...
Страница 145: ...12 DOP Deklaracja wla ciwo ci 145...
Страница 146: ...12 DOP Deklaracja wla ciwo ci 146...
Страница 147: ...147...