5. mise en place et montage
62
5.6 Aspiration d'huile et de boue
(pour regards LW 1000 uniquement sur demande)
Lors d'une élimination normale des déchets, le tuyau flexible du
véhicule de pompape est placé dans le séparateur d'effluents
légers et tout le contenu du séparateur est refoulé.
La quantité d'effluents légers est cependant nettement moindre
que le volume total du séparateur. L'utilisation du dispositif
d'aspiration d'huile permet de parer à ce problème.
Il suffit de raccorder le tuyau flexible au dispositif d'aspiration
d'huile pour évacuer les effluents légers. Ainsi, le véhicule de
pompape ne refoulera plus que le volume correspondant à la
quantité maximale d'effluents légers.
Cette manière de procéder est aussi synonyme d'une nette ré-
duction de la quantité de déchets à évacuer. Elle permet de ga-
gner du temps lors de l'élimination des déchets et réduit les
frais d'élimination. L'emploi d'un aspirateur à boues permet,
tout comme le dispositif d'aspiration d'huile, de réduire la quan-
tité de déchets à éliminer.
L'utilisation d'un tel dispositif peut s'avérer avantageux pour
les entreprises confrontées à d'importantes quantités de boue.
Il va de soi que le dispositif d'aspiration des boues permet
aussi de vider tout le séparateur.
Si les deux dispositifs entrent en action pendant l'élimination
des déchets, il est important de veiller à l'élimination de l'huile,
puis des boues. Le dispositif d'arrêt est fixé à l'arrivée avec le
collier de serrage conformément au dessin. Monter l'aspiration
d'huile sur le dispositif d'arrêt de sorte à respecter la distance
du niveau hydrostatique par rapport au bord supérieure de la
tubulure d'aspiration, puis ajuster et fixer.
Monter l'aspirateur à boues sur le dispositif d'arrêt, le diriger
jusqu'au sol puis le fixer.
Monter les éléments « Pinorrek » dans la rehausse, selon le
dessin, avec les vis d'acier jointes.
Pour le perçage, n'utiliser qu'un foret de Ø 3,5 mm. Utilisez le
Pinorrek comme gabarit de forage. Monter l'accouplement
Storz à l'extrémité du tube et fixer avec le collier de serrage.
Accrocher le tuyau flexible avec l'accouplement Storz en haut
dans l'élément Pinorrek, le diriger jusqu'au dispositif d'aspira-
tion et le couper à longueur. Relier le tuyau flexible et le dispo-
sitif d'aspiration et les fixer avec le collier de serrage. Le cou-
vercle fermé ne doit pas toucher l'accouplement Storz.
135 mm
Schlammabsaugung
Pinorrek
Ölabsaugung
Arretiervorrichtung
Ruhewasserspiegel
Oberkante
Ölabsaugung
¦
150 mm
Aspiration de vase
Aspiration d'huile
Dispositif d'arrêt
Bord supérieur de
l'aspiration d'huile
Niveau hydrostatique
Содержание 99403.10B
Страница 144: ...12 DOP Deklaracja wla ciwo ci 144...
Страница 145: ...12 DOP Deklaracja wla ciwo ci 145...
Страница 146: ...12 DOP Deklaracja wla ciwo ci 146...
Страница 147: ...147...