2018-12-18
27 / 74
Front sweeper FKM 60
Security
ENG
WARNING
Risk of injury / risk of environmental damage due to lack of / faulty
maintenance (general)!
There is a risk of injury due to a lack of maintenance as well as a risk of damage
to the environment and property (on the machine or system)!
•
Maintenance and cleaning work must only be carried out with the drive
stationary.
•
Simple cleaning and adjustment work may be carried out by operating
personnel. Maintenance and repair work may only be carried out by
trained specialist personnel.
•
Instructions and instructions from the original operating instructions of the
installed components must be observed.
•
If guards and working tools are subject to wear, these must be checked
regularly and replaced if necessary.
•
When replacing cutting tools, use appropriate tools and protective
equipment.
•
After maintenance and cleaning work, be sure to reinstall the guards and
put them in the protective position!
•
Only use original spare parts from the manufacturer, as these comply with
the technical requirements and thus the risk of accidents is minimized!
•
Cleaning with the high-pressure cleaner should be carried out so that the
water jet is not held directly in bearings, turned parts, grease nipples,
shaft seals, wheel hubs, etc. After each cleaning with the high-pressure
cleaner, the lubrication points must be re-greased. In case of
infringement, the right to guarantee expires!
•
For the first time after 5 operating hours and as a result, regularly check
that the nuts and bolts are tight and retighten if necessary.
•
Install protective devices after maintenance and bring them into the
protective position.
•
When carrying out maintenance, cleaning and repair work on the lifted
unit, always secure it with suitable support elements.
•
Repairs such as welding, drilling, grinding etc. must not be carried out on
supporting safety-related parts.
Содержание FKM 60
Страница 74: ...2018 12 18 74 74 ENG...