Kersten B00002, Оригинальное руководство по эксплуатации

Страница: 15 / 28

14
Operation of the self-propelled implement
6
Figure 7.1
7
Operation of the self-propelled implement
7.1 Start combustion engine
•
To start the engine, the drive lever (Fig.7.1, item 5) must be in the recess of the shift gate and
the lever for the PTO (Fig.7.1, item 3) in the "off" position.
If the levers are not in the position described above, the ignition of the engine is interrupted
and the engine does not start.
•
During the starting process, it is forbidden to operate the deadman switch (Fig.7.1;
•
To start the engine, refer to the respective Honda engine owner's manual.
7.2 Driving off
•
Press the throttle lever (Fig.7.1, item 6) approx.
•
Press down the deadman switch (Fig.7.1, item 1) and keep it pressed. Similarly, the lower lever
(Fig.7.1; Pos.2), which works like a conventional "drive clutch" of the car, pull and pulled.
•
Make sure that nobody is in front of and behind the machine!
•
For the forward movement push the driving lever (Fig.7.1, Pos.5) upwards and for the reverse
drive the driving lever downwards.
Make sure that the drive lever is always in its end position!