Kerning THM GOTHIC, Руководство по эксплуатации

Страница: 42 / 50

42
3.21 Ribbon Loading
A. To load either a Gothic or MICR ribbon, verify the printer is offline, raise the top
cover, and open the drum gate. The print drum will stop to permit ribbon
replacement.
B. Cut and remove an existing ribbon, then install the empty supply core in the take-
up ribbon holders. For initial installation, a ribbon and empty core are found in the
shipaway kit.
C. Grasp the supply ribbon holder pin and pull to separate the core holders.
D. Install the new ribbon in the holders as shown on Figure 3.3 and release the pin.
Check the ribbon holders for full engagement with the ribbon core.
Figure 3.3 Ribbon Spool Loading