manualshive.com logo in svg

Kerning THM GOTHIC, Руководство по эксплуатации

Поделиться
Скачать
Kerning THM GOTHIC Скачать руководство пользователя страница 28

28

3.7

Line Density Routine

A.

The display reads 

X  LINE/INCH

 where X is either 6 or 8.

B.

To toggle the display press the ENTER key.

C.

The display information is saved when exiting the routine.

3.8

Set Channel Routine

A.

Press ENTER to begin the routine.

B.

JOB # CHANNEL 1

 is displayed.

C.

The channel number is increased or decreased by using the NEXT, Up-

Arrow, or Down-Arrow key.

D.

Depress the ENTER key to select the channel number.

E.

ENTER STOPS:  is displayed.

F.

Enter all stop locations separated with a space (NEXT key).  Entries can be

erased with the CLEAR key.

G.

Press the ENTER key to store the stop locations and the display will flash

CHANNEL SET 

and return to the menu and display 

JOB # CHANNEL X

,

where X is the currently selected channel.

H.

Repeat the procedure for additional channels.

I.

The CLEAR key is used to erase the previous entry while entering

channels.  All other usage will return to the Program mode.

CAUTION

Do not attempt viewing the channel stops.  Any attempt to

review the channel entries will clear the channel memory.

Содержание THM GOTHIC



















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды