Kernel Multi Check, Руководство пользователя

Страница: 25 / 48

NOTE:
The best puncture site is on the side of fingertip, because it has the best blood supply.
6. Press the trigger on the puncturer.
7. Lift up the puncturer.
8. Get a drop of blood.
9. Put the drop of blood on one side or the other side of the test strip target
area. The blood will be absorbed and cause the target area to turn red. The
testing reaction starts when the meter beeps. The meter starts to count down
10 seconds then show your result on the screen. The meter stores your result
in its memory automatically.
NOTE:
How much blood should be applied?
Although only a small amount of blood is needed,it is very important that
you put enough blood on your test strip so that the entire reaction zone is
covered with blood. This ensures that your meter can give accurate and reliable
results.
Cautions:
If you don’t apply enough blood, you need to use a new test strip to do the test again.
10. In about 10 seconds, the screen will display measured glucose value.
Record the glucose value in your log book.
25