Kernau KBO 1066.1 S PT B, Руководство по эксплуатации

Страница: 40 / 54

EN 40
Programator operation and oven control
Programator symbols:
Setting the time:
After energizing the oven, timer will be reset to 0:00
and this setting will be blinking.
•
Press and hold MENU (or simultaneously touch
< / > ) until you will see on the display and the
dot below the symbol is flashing,
•
Touch < / > 7 seconds to set the current time.
MENU
- select the mode of operation
- sensor Plus
- sensor Minus
- appliance on indicator
- Timer indicator
- Duration
- End Time
To store the new time setting, wait approximately 7 seconds after time has been set. The dot below
the symbol will stop flashing.
You can adjust the time later. To do this touch < / > simultaneously and adjust the current time while the dot
below the symbol is flashing.
Warning
The oven can be operated only after symbol appears on the screen.
T imer
:
Timer can be set at any time, regardless of other functions. It can be set
from 1 minute up to 23 hours and 59 minutes.
To set the timer, you should:
•
touch MENU, then the display will show blinking :
•
use the < / >, sensors to set th e Timer. The display will show the set time and Timer
symbol . Once the set time elapses, alarm sounds and the icon flashes,
•
Touch and hold < / > or MENU to mute the alarm. The will be off and the display will
show the current time after approximately 7 seconds
Note:
Audible signal will turn off after 7 minutes if no sensors are touched.
Semi-automatic operation:
If you would like your oven to shut down after a certain time: