TFCD_A-BA-e-2110
13
7.3 Integration, setting and leveling
Remove any transport protection at the scale bottom.
Install the scale plates as shown in the drawing.
Place the scale on smooth surface.
Level the scale using the leveling feet. The air bubble in the leveler must be
present in the marked area.
Check leveling at regular intervals.
7.4 Power supply
Check if the scale voltage is set correctly. The scale can be connected to
the mains only when the voltage specified on the scale (sticker) and the
local voltage are identical.
Always use the original power supply by KERN. Using any other products
requires KERN consent.
Important information:
Before you start the device, check the power cord for damage.
The power cord must not have any contact with liquids.
The plug must be always readily available.
