30
TFCD_A-BA-e-2110
13 Help for any minor failures
If there are any program execution problems, the scale should be switched off and
disconnected from the mains for a while. Next, the weighing process should be
started anew.
Problem
Possible cause
The weight indicator is not
lit.
•
The scale is not on.
•
Interrupted mains connection (mains cable not
connected/damaged).
•
Mains voltage failure.
The weight indication
keeps fluctuating.
•
Draft / air movements.
•
Table/air vibrations.
•
The scale plate is in contact with foreign bodies.
•
Electromagnetic fields / static discharge (select
another location / if possible, switch off the
interfering device).
The weighing result
is clearly wrong.
•
The scale indication was not reset.
•
Incorrect adjustment.
•
Scale not placed on a level surface.
•
There are heavy temperature fluctuations.
•
The heating time not observed.
•
Electromagnetic fields / static discharge (select
another location / if possible, switch off the
interfering device).
