TFCD_A-BA-e-2110
17
8 Operation
8.1 Switching on/off
Switching on:
Press the
ON/OFF
button.
Once the displays is lit, the scale autotest will be carried out.
Wait until the weight is displayed, the scale is ready for use.
Switching off:
Press the
ON/OFF
button, the display will go off.
8.2 Zeroing
Zeroing corrects the effect of small pollutants on the scale plate.
Remove the load from the scale.
Press
ZERO
, the zero indications and <
ZERO
> symbol will be displayed.
8.3 Ordinary weighing
Check the zero indication, whenever required zero by pressing the
ZERO
button.
Place the weighed material.
Wait until the stabilization indicator is displayed [ ].
Read out the weighing result.
Overload warning
Always avoid any device overload higher than the stipulated maximum
load (
Max
), deducting the tare from the existing load. This could damage
the device.
The exceeded maximum load is indicated with
--ol--
. Reduce the scale
load or reduce the initial load.