KERN MPS 200K100M, Руководство по эксплуатации, Страница: 104 / 168

MPS / MTS / MXS / MWS-BAPS-e-1710 46
Printing Pre-Tare memory (refer also to section 8.6):
To do this, press the
PRE-Tare key repeatedly until the display will show the „ ni ” ( M )
symbol.
Short pressing the
PRINT key will activate printing of the values saved in 5 memo-
ries.
M1 0.0 kg
M2 7.0 kg
M3 10.0 kg
M4 30.0 kg
M5 50.0 kg
8.7 Printing function
To use this function, you need the RS232 interface cable (available as accessories)
which is connected with the round plug at the terminal back.
Note: In medical applications, only the peripheral equipment meeting EN 60601-1
standard can be connected to the interface.
When a scale is in the weighing mode, pressing the
PRINT key will result in output of
the particular data, presented below, via the interface. It is the standard way to output
data, which cannot be changed.
G
88.8 kg Gross weight
T 2.0 kg Taring weight
N 86.8 kg Net weight
180.0 cm Size of the person
24.4 BMI BMI value
8.7.1 Parameters of RS232 interface
Set parameters of the scale interface on the connected device. It is not possible to
change the scale parameters.
Baud rate:
9600 bps
Parity check: no
Data length: 8 bits
Stop bit: 1 bit
Handshake: no or Xon/Xoff
Data code: ASCII