KERN KERN AEJ, Руководство по обслуживанию

Страница: 21 / 32

b. How to re-set the address data
1. While pressing both + , press to switch on the balance.
Release both keys when [
Ht00x
] appears (maintenance mode).
2. After a while, display changes to weight value (not the zero point).
Press and hold until appears after displaying .
Press and hold again until appears.
Press key once.
3. The first address data (Addr. Number 00) is displayed.
data
addr. no.
4. Press key, appears. Every time is pressed, the
numerical number changes as .
Example
: To set at addr. No. , select as the first step.
5. Press once, then numerical number ( in this case) shifts to upper digit.
. Set numerical number by pressing the key once.
6. Press to display a numerical number at the right side.
7. Press key to select in the right side. By pressing key you set
in addr. and move to next address.
8. Input other data by the same procedure. When you set data in all the address,
the balance returns to normal weighing mode.
•
Even after you set all data and return to weighing mode, the balance is still in
the maintenance mode. In order to exit from the maintenance mode, please
turn the power switch OFF.
•
If you want to stop address data setting, you push and return to weighing
mode in the maintenance mode.
21