background image

 

EW/EG-N/EWB-e-1627 

25 

5.9 

Verification  

 
General: 
 
According to the EU guideline 90/384/EEC balances must be verified if they are to be 
used as follows (legally regulated area): 
 

a)  For commercial transactions if the price of goods is determined by weighing 

b)  For the production of medines in pharmacies as well as for analyses in the 

medical and pharmaceutical laboratory 

c)  For official purposes 

d)  For the production of finished packages  

In case of doubt, please contact your local office of weights and measures.  

 
Verification information 
 
An EU qualification approval is available for those balances marked as appropriate 
for verification in the technical data. In the event that the balance is applied in an ar-
ea subject to verification  as described above, it must be verified and re-verified at 
regular intervals. 
Re-verification of a balance is carried out in compliance with the respective legal pro-
visions of the states.  The term of verification  validity for balances in Germany, for 
example, is normally 2 years.   
The legal provisions of the country of use are to be observed.  

Содержание EG 220-3NM


























































Отзывы: