Kermi x-flair, Руководство по установке

Страница: 5 / 24

5
EN – x-flair
Permissible use
The radiator should be used only for heating indoor
spaces. Any other use is contrary to the intended purpose
and therefore not permissible.
Misuse
The radiator is not suitable for seating or as a climbing
or scaling aid.
The top of the radiator must not be covered with textiles or
impermeable materials.
Safety information
Ŷ
Read these instructions thoroughly prior to installation/
initial operation.
Ŷ
After installation, hand over the instructions to the
end consumer.
Ŷ
The device may be used by persons with limited phy-
sical, sensory, and mental abilities or by persons with
little experience and knowledge, as well as children
over 8 years old under supervision or providing they
have been instructed on safe use of the device and un-
derstand the ensuing risks.
Children less than 3 years old are to be kept away from
the unit unless they are under constant supervision.
Children over 3 years old and less than 8 years old may
only switch on and off the unit subject to the above
conditions, provided the unit is placed or installed in its
normal position of use.
Children over 3 years old and less than 8 years old
may not clean the device and may also not carry out
“maintenance by the user”. Playing with the device is
prohibited.
Warning
Risk of burns!
The radiator surface temperature can rise to 55 °C
(131 °F).
Ŷ
Be careful when touching the radiator.
Warning
Risk of overheating!
Ŷ
To avoid overheating,
do not cover the unit.
Warning
Risk of scalding due to hot water squirting out
when bleeding the radiator!
Ŷ
Protect your face and hands.
Warning
Risk of injury!
Ŷ
Note the weight of the radiator (see manufacturer's
data).
Ŷ
At 25 kg and above, the work should be carried out
with a lifting device or by several persons.
Fan unit
Ŷ
The fan unit cannot be retrofitted.
Ŷ
The fan unit can be switched off using a toggle switch
on the housing (for cable outlet radiator) (see Fig. B).
Ŷ
If the mains connection cable is damaged, it must be
replaced.
Ŷ
The fixing of the mains connection cable to the radiator
provides strain relief and must not be removed. If da-
maged, it must be replaced.
Ŷ
Ensure that the radiator is always completely filled and
has been bled, so that the radiator heats up properly.
Maintenance
Ŷ
Bleed the radiator after initial operation and after
lengthy interruptions of operation.
Ŷ
Use a commercially available radiator
key.
Cleaning
Ŷ
Use only mild, non-scouring cleaning agents when
cleaning the steel radiator.
Ŷ
See the technical documentation for cleaning the fan
unit.
Complaints
Please contact your specialist partner/supplier.
Installation and repairs
Only allow specialist partners to carry out installation and
repair work to prevent any warranty claims from being ren-
dered null and void.
Disposal
Recycle or dispose of disused radiators, including accesso-
ries, properly. Comply with local regulations.