KEPCO HSM 12-84, Руководство оператора

Страница: 14 / 34

2-2
HSMSERIES OPR 052912
FIGURE 2-2. HSM SERIES REAR PANEL CONNECTIONS
TABLE 2-2. I/O CONNECTOR PIN ASSIGNMENTS
PIN NO. NAME DESCRIPTION OF FUNCTION REF. PAR.
1 X
NO CONNECTION
2 X
NO CONNECTION
3 FFS-1
FAN STATUS - NORMALLY CLOSED CONTACT
3.14
4 ACS-C
SOURCE POWER STATUS - COMMON CONTACT
3.14
5 ACS-2
SOURCE POWER STATUS - NORMALLY CLOSED CONTACT
3.14
6 X
NO CONNECTION (SEE NOTE 1)
7 RC2
REMOTE INHIBIT - NORMALLY LOW INPUT (SEE NOTE 2)
3.12
8 RC1
REMOTE INHIBIT - NORMALLY HIGH INPUT (SEE NOTE 2)
3.12
9 X
NO CONNECTION (SEE NOTE 1)
10 X
NO CONNECTION
11 OTS-C
OVERTEMP STATUS - COMMON CONTACT
3.14
12 PSS-C
OUTPUT STATUS - COMMON CONTACT
3.14
13 PSS-2
OUTPUT STATUS - NORMALLY CLOSED CONTACT
3.14
14 ISHARE
LOAD SHARE SIGNAL BUS (0-5.5V) (SEE NOTE 3)
2.7.6
15 IPROG
ANALOG PROGRAMMING INPUT - CURRENT (0-10V) (SEE NOTE(3)
3.5
16 X
NO CONNECTION
17 VRP-1
RESISTIVE PROGRAMMING INPUT (0-10K)
3.3
18 VPROG
ANALOG PROGRAMMING INPUT - VOLTAGE (0-10V) (SEE NOTE 3)
3.3
19 -S
NEGATIVE ERROR SENSE INPUT
2.7.5
20 X
NO CONNECTION
21 FFS-2
FAN STATUS - NORMALLY OPEN CONTACT
3.14
22 FFS-C
FAN STATUS - COMMON CONTACT
3.14
23 ACS-1
SOURCE POWER STATUS - NORMALLY OPEN CONTACT
3.14
24 X
NO CONNECTION (SEE NOTE 1)
25 AUXRTN
AUXILIARY SUPPLY RETURN (SEE NOTE 2)
3.11
26 5VAUX
AUXILIARY SUPPLY OUTPUT
3.11
27 X
NO CONNECTION (SEE NOTE 1)
28 X
NO CONNECTION
29 OTS-2
OVERTEMP STATUS - NORMALLY OPEN CONTACT
3.14
30 OTS-1
OVERTEMP STATUS - NORMALLY CLOSED CONTACT
3.14
31 PSS-1
OUTPUT STATUS - NORMALLY OPEN CONTACT
3.14
32 IMON
ANALOG OUTPUT CURRENT MONITOR (0-5.5V) (SEE NOTE 3)
3.13
33 ISET
CURRENT LIMIT SETPOINT MONITOR (0-10V) (SEE NOTE 3)
3.7
34 X
NO CONNECTION
35 VRP2
RESISTIVE PROGRAMMING INPUT - VOLTAGE (0-10K)
3.3
36 VSET
OUTPUT VOLTAGE SETPOINT MONITOR (0-10V) (SEE NOTE 3)
3.7
37 +S
POSITIVE ERROR SENSE INPUT
2.7.5
NOTES (1) THESE PINS ARE LEFT BLANK TO PROVIDE VOLTAGE ISOLATION BETWEEN OUTPUT AND 5V AUX SUPPLY
WHICH POWERS THE REMOTE INHIBIT CONTROL CIRCUITRY.
(2) THESE SIGNALS ARE REFERENCED TO AUXRTN (PIN 25).
(3) THESE SIGNALS ARE REFERENCED TO -S (PIN 19).