053119
228-1915
9
KEPCO, INC.
131-38 SANFORD AVENUE
FLUSHING, NY. 11355 U.S.A.
TEL (718) 461-7000
FAX (718) 767-1102
http://www.kepcopower.com
email: [email protected]
HOW TO MODIFY A PARAMETER.
First access the parameter by accessing the proper
menu as described above. To modify a parameter
listed in a menu or submenu, proceed as follows:
1. Highlight the parameter using the
Y
and
U
keys.
2. When the desired choice is highlighted, press
!
to modify the active setting. The choices are dis-
played with the active setting highlighted. In the
case of numerals, the units digit is highlighted.
•
To change a numeric setting, press the num-
ber keys, then press
ENTER
to program the
numbers entered. Use the
CLEAR key
to
clear numbers entered and start over. The
ADJUST
control can also be used to incre-
ment or decrement the highlighted digit.
Pressing
ADJUST
while rotating adjusts the
least significant digit. If the output is on (unit
not in Standby) changes made using the
ADJUST
control are immediately applied to
the output.
•
For alphanumeric characters use multiple
presses of the number keys for letters or sym-
bols:
0
(space),
1
(+, –, /),
2
(ABC),
3
(DEF),
4
(GHI),
5
(JKL),
6
(MNO).
7
(PQRS),
8
(TUV),
9
(WXYZ). Use the
T
key to highlight the next character. As an alter-
native, the
U
or
Y
keys or
ADJUST
control
will scroll through numbers, and letters and
symbols. Use the
CLEAR
key to clear the
entire alphanumeric field and start over
3. Press
$
to apply the change and return to the
menu (to change another parameter, repeat steps
1 and 2). To abort (return to the menu without
applying the change), press
%
.
NOTE:Press
HELP
key for more information,
press
HELP
again to see multiple
screens; press
CLEAR
key to exit the
help screen.
FIGURE 6. BOP 2KW SERIES, REAR PANEL VIEW, LINKS INSTALLED FOR LOCAL SENSING
