KEP PT-14 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 36

KEP PT-14 Скачать руководство пользователя страница 18

KharkovEnergoPribor Ltd. | KEP Ltd.
+380 57 393 1069
www.kep.ua | [email protected]

18

USER MANUAL

When you use the null method you should maintain the optimum gain
level of the Tracer. If the gain is too low, the barograph drift from the
center will be minor or unnoticeable. If the gain is too high, the
barograph drift may be drastic. This may give the impression of
chaotic operation of the Tracer.

When you move along the route of the utility, the signal may rise
sharply. This means that the bending (or branching) of utility takes
place. The indicator will show its direction.

When you locate the utilities surrounded with other lines and cables,
use the method of sharp peak since the interferences of adjacent
lines is too high during peak tracing.

4.5.3

Locating with COMPASS option

The COMPASS mode is used to facilitate location of single long-
distance utility lines with bends and turns. This COMPASS shows the
orientation of the located utility relative to the Tracer. This facilitates
the user operation.

The COMPASS option is selected via Menu as follows:

Menu >

Indication> TRACE scale > COMPASS

.

The  COMPASS  arrow  will  show  the  direction  of  the  utility
(see Figure 4, Pos.19). In the TRACE mode, the Tracer displays the
peak  scale  and  input  signal  strength;  in  the  TRACE-SONDE  mode,
the  Tracer  displays  the  scale,  strength  and  polarity  of  signal  at  the
SONDE input.

Locating with the COMPASS feature is shown in Figure 6.

Moving along the target line, try to arrange the Tracer relative to the
utility so that the Utility position arrow (Figure 4 Pos.19) turned to be
aligned with the Tracer axis (Figure 4 Pos.18).

CAUTION!

The utility position arrow shall be used for visual presentation of
utility location only. It shall not be used for precise localization of
the target cable. If the signal is weak, the target line environment is
crowded and noisy, use the peak method as specified in 4.5.2.1.

The utility position arrow may become fuzzy during location. This
may occur when the Tracer is perpendicular to the path of the utility
line or the Tracer and target utility are distant, or locating signal is too
weak.

«
...
16
17
18
19
20
...
»

Содержание PT-14





































Отзывы:

Нет отзывов