KEP INT-69R, Инструкция по установке и эксплуатации

Страница: 19 / 26

15
REMARKS
DISPLAY PRESS
SETTING THE PRESETS & PANEL LOCK
SETTING
THE
PRESETS
PRE A
Press any key to view
or change existing
value
PRE B
Press any key to view
or change existing
value
CoDE
Press any key to enter
the 5-digit lock code.
LoC
or
UN LoC
PRE A = Preset A (Final Preset); The
set point at which output A will trigger.
If the displayed value is not the de-
sired preset, press the key(s) under
the digit to be changed.
PRE B = Preset B (Prewarn); The set
point at which output B will trigger. If
the displayed value is not the desired
preset, press the key(s) under the digit
to be changed.
Key in the lock code (see program-
ming step 3) by pressing the keys
under the digits to be changed. Each
time a key is pressed the digit will
increment one. Press the RST/EN-
TER key to enter the displayed code.
After the code is entered the unit will
display LOC (unit is locked) or UN LOC
(unit is un-locked). This message will
be displayed for approximately 3 sec-
onds before the unit returns to the run
mode. If an invalid code is entered, no
message is displayed; try again.
PRE A
PRE B
ENTER
LOCK
LOCK
LOCK
Press LOCK 3 times within 5 seconds
(If LOCK is pressed once, unit freezes display)
SETTING
THE
LOCK
STATUS
NOTE:
Presets can
be set at any
value form 0
to 59999.